PG Drives VR2 fault codes

MakerPG Drives Technology (Curtiss-Wright) CONFIRMED
How codes showBattery gauge on the VR2 joystick flashes 1 to 10 bars (red, amber, green). Speed LEDs flashing with the gauge (+S) = communication fault; actuator LED flashing with the gauge (+A) = actuator trip

Codes (17)

CodeMeaning
1 barLow battery voltage CONFIRMED
2 barsLeft motor disconnected CONFIRMED
4 barsRight motor disconnected CONFIRMED
3 barsLeft motor wiring trip CONFIRMED
5 barsRight motor wiring trip CONFIRMED
6 barsCharger connected (drive inhibited) CONFIRMED
7 barsPossible joystick trip CONFIRMED
8 barsPossible control system trip CONFIRMED
9 barsSolenoid brake trip CONFIRMED
10 barsHigh battery voltage CONFIRMED
Speed LEDs flash with the gauge (+S)Communication fault CONFIRMED
Actuator LED flashes with the gauge (+A)Actuator trip CONFIRMED
Battery gauge steps upCharging (drive inhibited) CONFIRMED
Speed indicator ripples up and downChair locked CONFIRMED
Speed indicator flashesSpeed limited CONFIRMED
Battery gauge ripples at power-onJoystick displaced CONFIRMED
Gauge blinks every 2.5 secondsSleep mode CONFIRMED

Codes without a link are status lights or not used, so they don't have their own page.

Models using this controller

Notes: Powerchair controller (moved to the Powerchairs section 2026-10-26). Verified from the dealer workshop poster. Same layout as the S-Drive poster; the 10-bar text says 'applied to the S-Drive', wording copied from the S-Drive sheet. The motor lines carry an asterisk ('left motor *') with no footnote visible on the poster.

Summarised from public manuals. Always check the product's own manual before any repair.