PG Drives VR2 fault code 1 bar: Low battery voltage

The battery needs charging or there is a bad connection to the battery

1. Check the connections to the battery
2. If the connections are good, try charging the battery

Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.

Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.

Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

• Sunrise Medical (Quickie) Quickie Q100 R
• Sunrise Medical (Quickie) Quickie Q200 R
• Eden Mobility (own brand) Jupiter (2nd & 3rd gen)
• Eden Mobility (own brand) Comet
• Eden Mobility (own brand) Apollo
• Eden Mobility (own brand) Venus
• Pride Mobility Jazzy Select (UK)
• Drive DeVilbiss Enigma Energi+
• Drive DeVilbiss Enigma Energi (from 2006)
• Drive DeVilbiss Mambo (fixed base)

1 bar · 2 bars · 4 bars · 3 bars · 5 bars · 6 bars · 7 bars · 8 bars · 9 bars · 10 bars · Speed LEDs flash with the gauge (+S) · Actuator LED flashes with the gauge (+A) · Battery gauge steps up · Speed indicator ripples up and down · Speed indicator flashes · Battery gauge ripples at power-on · Gauge blinks every 2.5 seconds

All PG Drives VR2 codes ›