PG Drives VR2 fault code 2 bars: Left motor disconnected

The left motor has a bad connection

1. Check all the connections and leads between the left motor and the power module

Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.

Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.

Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

• Sunrise Medical (Quickie) Quickie Q100 R
• Sunrise Medical (Quickie) Quickie Q200 R
• Eden Mobility (own brand) Jupiter (2nd & 3rd gen)
• Eden Mobility (own brand) Comet
• Eden Mobility (own brand) Apollo
• Eden Mobility (own brand) Venus
• Pride Mobility Jazzy Select (UK)
• Drive DeVilbiss Enigma Energi+
• Drive DeVilbiss Enigma Energi (from 2006)
• Drive DeVilbiss Mambo (fixed base)

1 bar · 2 bars · 4 bars · 3 bars · 5 bars · 6 bars · 7 bars · 8 bars · 9 bars · 10 bars · Speed LEDs flash with the gauge (+S) · Actuator LED flashes with the gauge (+A) · Battery gauge steps up · Speed indicator ripples up and down · Speed indicator flashes · Battery gauge ripples at power-on · Gauge blinks every 2.5 seconds

All PG Drives VR2 codes ›