Dynamic Rhino2 (scooter flash) fault codes
MakerDynamic Controls (Allient NZ) CONFIRMED
How codes showStatus LED / battery gauge flashes. Scooter type 250ms on/500ms off/2s break. HHP shows 4 digits: first 2 = flash code, last 2 = sub-code. Wizard log holds last 16 faults. R-Series type 140ms on/400ms off/2.4s break (both timings on the dealer workshop poster)
Codes (10)
| Code | Meaning |
|---|---|
| 1 flash | Battery low |
| 2 flashes | Low battery fault |
| 3 flashes | High battery fault |
| 4 flashes | Current limit time-out / controller too hot |
| 5 flashes | Park brake fault |
| 6 flashes | Drive inhibit / OONAPU |
| 7 flashes | Speed pot / throttle fault |
| 8 flashes | Motor voltage fault |
| 9 flashes | Other / internal error |
| 10 flashes | Push / freewheel too fast (OEM tables) |
Codes without a link are status lights or not used, so they don't have their own page.
Models using this controller
Notes: Code 10 (push/freewheel too fast) appears in several OEM tables. Codes 1–9 checked 26 Oct 2026 against the dealer workshop poster: all match. Poster extras: 3 = if travelling down a slope, reduce speed to minimise regenerative charging; 9 = check all connections and wiring.
Summarised from public manuals. Always check the product's own manual before any repair.