Drive DeVilbiss Sport Rider – fault codes, parts & serial label

Typemid

Years / revisionSR001, SR003

ControllerDynamic Rhino II CONFIRMED

Fault codes (10)

From the Rhino2 (DS90 / DS120 / DS160) – Scooter / R-Series flash type code set. All Rhino2 (DS90 / DS120 / DS160) – Scooter / R-Series flash type codes

Code	Meaning	Checks
1 flash	Battery low	Recharge batteries
2 flashes	Low battery fault	Recharge; check battery, connections and wiring
3 flashes	High battery fault	Slow down on hills; cycle power
4 flashes	Current limit time-out / controller too hot	Switch off a few minutes; check motor and wiring
5 flashes	Park brake fault	Check brake, its wiring and freewheel lever
6 flashes	Drive inhibit / OONAPU	Release stop, unplug charger, centre throttle, cycle key; recalibrate throttle
7 flashes	Speed pot / throttle fault	Check pots and loom
8 flashes	Motor voltage fault	Check motor and connections
9 flashes	Other / internal error	Contact service agent; replace module
10 flashes	Push / freewheel too fast (OEM tables)	Slow down when pushing; cycle key

No serial location data yet for this mobility scooter. Serial codes

Part	Part no.
Carbon brush, SR001/SR003	C09-029-04400
Motor only, up to P119631	C09-061-00600
Motor only, P119632 onwards	C09-061-01201
Electromagnetic brake only, SR001	C09-061-00701
Electromagnetic brake only, SR003	C09-073-00300
Manual brake assembly	S35-061-00100
Rhino 2 controller, P119632 onwards	C10-029-00400
Throttle, SR001/SR003	S12-061-00100
Charger, 24V 8A, offboard	C12-073-00100
12 volt battery (catalogue text '79AMP', code 12V100AH)	12V100AH
Wiring assembly, P119632 onwards	S18-061-00300
Upper control module, SR001/SR003	S18-061-00200
Front wheel, SR001	S05-061-00100
Rear wheel, SR001	S06-061-00100
80amp (80A) Mobility Scooter Circuit Breaker

Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.