Dynamic Rhino2 (scooter flash) fault code 6 flashes: Drive inhibit / OONAPU
Likely causes
Stop function (e.g. seat raised), charger inhibit, throttle not neutral at power-up; throttle may need recalibrating
Step-by-step checks
- Release stop, unplug charger, centre throttle, cycle key
- Recalibrate throttle
Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.
Parts that usually fix this INFERRED
Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.
HWR-77086035Charger listed for the Drive DeVilbiss Royale 4
HWR-77146086Charger listed for the Drive DeVilbiss Royale 4
S12-051-00100Throttle pot listed for the Drive DeVilbiss King Cobra
HWR-77126104Throttle pot listed for the Drive DeVilbiss Royale 4
Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Models using this controller
Other Dynamic Rhino2 (scooter flash) codes
1 flash · 2 flashes · 3 flashes · 4 flashes · 5 flashes · 6 flashes · 7 flashes · 8 flashes · 9 flashes · 10 flashes
Source: www.manualslib.com/manual/3228987/Dynamic-Rhino2-Ds90.html?page=126 ↗
Summarised from public manuals. Always check the product's own manual before any repair.