Dynamic Rhino2 (scooter flash) fault code 9 flashes: Other / internal error

Code9 flashes
MeaningOther / internal error
ControllerRhino2 (DS90 / DS120 / DS160) – Scooter / R-Series flash type CONFIRMED
How it showsStatus LED / battery gauge flashes. Scooter type 250ms on/500ms off/2s break. HHP shows 4 digits: first 2 = flash code, last 2 = sub-code. Wizard log holds last 16 faults. R-Series type 140ms on/400ms off/2.4s break (both timings on the dealer workshop poster)
Likely part needed: Controller INFERRED – only if the checks below point to it. Find it ›

Likely causes

Controller internal fault

Step-by-step checks

  1. Contact service agent
  2. Replace module

Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.

Parts that usually fix this INFERRED

Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.

Controller, Dynamic 180A (Rhino 2) · part no. C10-062-00600
Controller listed for the Drive DeVilbiss King Cobra
Find this part on Amazon UK ↗Find this part on eBay UK ↗
S-Drive controller · part no. HWR-77107173
Controller listed for the Drive DeVilbiss Royale 4
Find this part on Amazon UK ↗Find this part on eBay UK ↗

Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Models using this controller

Other Dynamic Rhino2 (scooter flash) codes

1 flash · 2 flashes · 3 flashes · 4 flashes · 5 flashes · 6 flashes · 7 flashes · 8 flashes · 9 flashes · 10 flashes

All Dynamic Rhino2 (scooter flash) codes ›

Source: www.manualslib.com/manual/3228987/Dynamic-Rhino2-Ds90.html?page=126 ↗

Summarised from public manuals. Always check the product's own manual before any repair.