Stannah 600 fault code 9 or F: Engineer needed
Code9 or F CONFIRMED
MeaningEngineer needed
Control board600 series display (Siena/Sofia/Solus/Starla 600) CONFIRMED
How it showsSingle digit/letter on the display on the carriage
Likely part needed: Controller INFERRED – only if the checks below point to it. Find it ›
Likely causes
Internal fault (sub-code shown to engineer)
Step-by-step checks
- Switch off/on once
- If it returns, call Stannah
- Note what the display shows
Stairlift faults that stay after these checks are a job for a trained engineer.
Parts that usually fix this INFERRED
Matched by ScootScan from the fault description to parts listed for models that use this control board. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.
Stannah 600 Main PCB – Green Version
Controller listed for the Stannah Siena 600
Controller listed for the Stannah Siena 600
Stannah 600 Main PCB – Green Version
Controller listed for the Stannah Sofia 600
Controller listed for the Stannah Sofia 600
Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Models using this control board
Other Stannah 600 codes
Source: www.stannah.com/servicing-aftercare/600-product-support ↗
Summarised from public manuals. Always check the product's own manual before any repair.