Stannah 600 fault code 1: Batteries not charging
Code1 CONFIRMED
MeaningBatteries not charging
Control board600 series display (Siena/Sofia/Solus/Starla 600) CONFIRMED
How it showsSingle digit/letter on the display on the carriage
Likely part needed: Battery INFERRED – only if the checks below point to it. Find it ›
Likely causes
Lift not parked on a charge point, wall socket switched off, lift's master switch off, or a power cut
Step-by-step checks
- Park the lift at the charge point
- Check the wall switch and the lift's on/off switch
- Check other sockets for a power cut
Stairlift faults that stay after these checks are a job for a trained engineer.
Parts that usually fix this INFERRED
Matched by ScootScan from the fault description to parts listed for models that use this control board. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.
Stannah 600 Stairlift Batteries X 2
Battery listed for the Stannah Siena 600
Battery listed for the Stannah Siena 600
Stannah 600 Stairlift Batteries X 2
Battery listed for the Stannah Sofia 600
Battery listed for the Stannah Sofia 600
Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Models using this control board
Other Stannah 600 codes
Source: www.stannah.com/servicing-aftercare/600-product-support ↗
Summarised from public manuals. Always check the product's own manual before any repair.