Stannah Solus 600 – fault codes, parts & serial label
Typestraight
Years / revision600 platform
Control board600 control (display) CONFIRMED
Fault codes (8)
From the 600 series display (Siena/Sofia/Solus/Starla 600) code set. All 600 series display (Siena/Sofia/Solus/Starla 600) codes
| Code | Meaning | Checks |
|---|---|---|
| 1 | Batteries not charging | Park the lift at the charge point; check the wall switch and the lift's on/off switch; check other sockets for a power cut |
| 2 | Normal – no fault | Nothing to do. If it still won't move, check the key and the seat/arm position |
| 3 | Safety edge touched (footrest or carriage) | Drive the lift the opposite way a little, remove the obstruction, then carry on |
| 4 | Power key out or on/off switch off | Fit/turn the key and switch the lift on |
| 5 | Seat sensor not sensing a user, or downside arm not down | Sit back fully on the seat and lower the arm. UK page and US manual word this slightly differently – see QA |
| 6 | Seatbelt interlock (if fitted) not fastened | Fasten the belt fully |
| 7 | Seat not in travel position | Turn the seat back until it locks facing along the stairs |
| 9 or F | Engineer needed | Switch off/on once; if it returns, call Stannah. Note what the display shows |
Serial code label
No serial location data yet for this stairlift. Serial codes
Parts (5)
| Part | Part no. |
|---|---|
| Stannah 600 Stairlift Batteries X 2 | |
| Stannah 600 Main PCB – Green Version | |
| Stannah 600 Motor Gearbox | |
| Stannah 600 Stairlift Remote control | |
| Stannah 600 Charge Pin |
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.