PG Drives S-Drive fault codes

MakerPG Drives Technology (Curtiss-Wright) CONFIRMED
How codes showFlashes on battery gauge or status LED, pause, repeat. Programmer (PGDT PP1/SP-1/PC) shows 4-digit trip code

Codes (12)

CodeMeaning
1 flashLow battery
2 flashesMotor disconnected
3 flashesMotor wiring trip
4 flashesFreewheel switch trip (current list). Older Drive sheets: not used
5 flashesNot used
6 flashesInhibit 2 active – charger connected or seat not in drive position
7 flashesThrottle trip
8 flashesPossible control system trip
9 flashesSolenoid (park) brake trip
10 flashesHigh battery voltage
Slow single blink (every 2.5s)Sleep mode (not a fault)
8 flashes (after battery refit)Battery initiation artefact (Drive note)

Codes without a link are status lights or not used, so they don't have their own page.

Models using this controller

Notes: Most common UK scooter controller. Cycle key after fixing. Codes 1–10 checked 26 Oct 2026 against the dealer workshop poster: all match the current list (4 bars = freewheel switch trip, 5 = not used). Poster shows them as 1–10 lit bars (red/amber/green) on the battery gauge.

Summarised from public manuals. Always check the product's own manual before any repair.