PG Drives S-Drive fault code 6 flashes: Inhibit 2 active – charger connected or seat not in drive position

Off-board charger plugged in; seat/inhibit switch

1. Unplug charger
2. Check seat position and inhibit wiring

Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.

Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.

Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

• Drive DeVilbiss Envoy 4 / Envoy 6
• Drive DeVilbiss Prism
• Drive DeVilbiss Rio
• Drive DeVilbiss Neo
• Drive DeVilbiss Monte Carlo
• Drive DeVilbiss Monami / Vitesse
• Drive DeVilbiss Apollo (after 09/2003)
• Drive DeVilbiss PowerStroll
• Drive DeVilbiss FLEX-UK auto-folding
• Drive DeVilbiss MFLD-UK Manual Fold
• Pride Mobility Go-Go folding scooter (US)
• TGA Mobility Breeze S
• TGA Mobility Vita 3 / Vita 4
• TGA Mobility Vita Sport
• TGA Mobility Vita X
• Sunrise Medical / Sterling Sapphire 2
• Monarch Mobility Tesla II XL 4
• Heartway Mirage
• Eden Mobility (own brand) Bootmaster Elite
• Kymco Mini S ForU (EQ20CA)

1 flash · 2 flashes · 3 flashes · 4 flashes · 6 flashes · 7 flashes · 8 flashes · 9 flashes · 10 flashes · Slow single blink (every 2.5s) · 8 flashes (after battery refit)

All PG Drives S-Drive codes ›