Drive DeVilbiss Monami / Vitesse – fault codes, parts & serial label
Typemid/boot (varies)
Years / revisionMS030/MS031
ControllerPG S-Drive CONFIRMED
Fault codes (12)
From the S-Drive code set. All S-Drive codes
| Code | Meaning | Checks |
|---|---|---|
| 1 flash | Low battery | Charge batteries; check battery leads and connections |
| 2 flashes | Motor disconnected | Check motor connector/wiring; check freewheel lever |
| 3 flashes | Motor wiring trip | Check motor wiring for shorts; Dealer test |
| 4 flashes | Freewheel switch trip (current list). Older Drive sheets: not used | Put freewheel lever back to drive; cycle key |
| 5 flashes | Not used | — |
| 6 flashes | Inhibit 2 active – charger connected or seat not in drive position | Unplug charger; check seat position and inhibit wiring |
| 7 flashes | Throttle trip | Release throttle, cycle key; check wig-wag pot and wiring; recalibrate |
| 8 flashes | Possible control system trip | Check all connections; cycle key; replace controller if persistent |
| 9 flashes | Solenoid (park) brake trip | Check brake connector and coil; check freewheel |
| 10 flashes | High battery voltage | Check battery connections; cycle key |
| Slow single blink (every 2.5s) | Sleep mode (not a fault) | Cycle key to wake |
| 8 flashes (after battery refit) | Battery initiation artefact (Drive note) | Switch key off and on again; normal operation should return |
Serial code label
No serial location data yet for this mobility scooter. Serial codes
Parts (0)
No parts recorded for this model yet.
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.