Dynamic SHARK fault code 9 flashes: Communication error between the Remote and the Power Module (poster label reads 'Parkbrake 2 (usually right)', likely a misprint)
Code9 flashes INFERRED
MeaningCommunication error between the Remote and the Power Module (poster label reads 'Parkbrake 2 (usually right)', likely a misprint)
ControllerSHARK powerchair control system (Remote + Power Module) CONFIRMED
How it showsFault indicator on the SHARK Remote flashes a number of times, pause, repeat
Likely part needed: Battery INFERRED – only if the checks below point to it. Find it ›
Likely causes
Batteries completely empty; batteries damaged; SHARK Bus cable loose or damaged
Step-by-step checks
- Charge the batteries
- Damaged batteries: contact your dealer
- Check the SHARK Bus cable is not loose or damaged
- Contact your dealer
Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.
Parts that usually fix this INFERRED
Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.
Battery
General search – no specific part number is listed for these models yet, so check fit carefully.
General search – no specific part number is listed for these models yet, so check fit carefully.
Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Models using this controller
Other Dynamic SHARK codes
Summarised from public manuals. Always check the product's own manual before any repair.