Invacare LiNX (Dynamic) fault code 6 flashes: Right brake fault
Code6 flashes CONFIRMED
MeaningRight brake fault
ControllerLiNX powerchair control system (Invacare LiNX) CONFIRMED
How it showsStatus indicator on the remote flashes red a number of times (1 to 7), pause, repeat. All LEDs flashing = joystick not centred at power-on
Likely part needed: Brake INFERRED – only if the checks below point to it. Find it ›
Likely causes
Fault on the right magnetic brake (or freewheel lever released)
Step-by-step checks
- Put the freewheel lever in drive
- Check the brake plug
Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.
Parts that usually fix this INFERRED
Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.
Brake, LH · part no.
Brake listed for the Invacare Bora
SP1527950Brake listed for the Invacare Bora
Brake, RH · part no.
Brake listed for the Invacare Bora
SP1527949Brake listed for the Invacare Bora
Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Models using this controller
Other Invacare LiNX (Dynamic) codes
Source: invacaredocs.com/assets/documents/PIM/User_Manual_Linx_(en).pdf ↗
Summarised from public manuals. Always check the product's own manual before any repair.