Invacare Fox – fault codes, parts & serial label

Typepowerchair (rear-wheel drive)

ControllerInvacare LiNX (LiNX builds listed in the LiNX service manual) INFERRED

Fault codes (8)

From the LiNX powerchair control system (Invacare LiNX) code set. All LiNX powerchair control system (Invacare LiNX) codes

Code	Meaning	Checks
1 flash	Remote fault	Switch off and on; check the remote cable; contact the provider
2 flashes	Network / configuration fault	Check all cables, recharge the batteries, check the charger
3 flashes	Motor 1 fault	Check the motor plug and wiring
4 flashes	Motor 2 fault	Check the motor plug and wiring
5 flashes	Left brake fault	Put the freewheel lever in drive; check the brake plug
6 flashes	Right brake fault	Put the freewheel lever in drive; check the brake plug
7 flashes	Module fault	Reverse away from any obstacle; switch off and on; contact the provider
All LEDs flash	Joystick not centred (drive out of neutral)	Release the joystick, switch off and on again

No serial location data yet for this powerchair. Serial codes

Part	Part no.
Castor 200x50mm PU, black rim	SP1578146
Wheel 12.5" x 2.25", puncture proof, black plastic rim	SP1582006
Wheel 12.5" x 2.25", puncture proof, black plastic rim	SP1073935
Rear Wheel 12.5" x 2.25", puncture proof, Aluminium Rim silver	SP1576191
Tire 12.5" x 2.25" Puncture Proof	23009262
Motor cpl. 6km/h LH Shark	SP1574377
Motor cpl. 6km/h RH Shark	SP1574378
Motor cpl. 6km/h LH VR2	SP1574379
Motor cpl. 6km/h RH VR2	SP1574380
Powermodule, Shark, 75A, drive only, DK-PMB01	1433332
Remote DK-REM D01, Shark2 (Drive only)	1492567
Powermodule, VR2, 60A, only drive, VR2 60	SP1504056
VR2 Remote (Drive only)	SP1504057
Battery, 12V/50Ah C20, AGM	SP1522107
Battery, 12V/34Ah C20, AGM	SP1521459

Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.