Invacare LiNX (Dynamic) fault code 2 flashes: Network / configuration fault
Code2 flashes CONFIRMED
MeaningNetwork / configuration fault
ControllerLiNX powerchair control system (Invacare LiNX) CONFIRMED
How it showsStatus indicator on the remote flashes red a number of times (1 to 7), pause, repeat. All LEDs flashing = joystick not centred at power-on
Likely part needed: Battery, Charger INFERRED – only if the checks below point to it. Find it ›
Likely causes
Network or configuration fault - loose cable, low battery or charger problem
Step-by-step checks
- Check all cables, recharge the batteries, check the charger
Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.
Parts that usually fix this INFERRED
Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.
Battery, 12V/30Ah C20, GEL · part no.
Battery listed for the Invacare Bora
P50021Battery listed for the Invacare Bora
Battery, 12V/31Ah C20, GEL · part no.
Battery listed for the Invacare Bora
P50029Battery listed for the Invacare Bora
Charger 8A, Gi Popular (Sweden only) · part no.
Charger listed for the Invacare Bora
5813987Charger listed for the Invacare Bora
Charger 10A, LADAC, incl. power cord continental shockproof · part no.
Charger listed for the Invacare Bora
SP1545511Charger listed for the Invacare Bora
Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Models using this controller
Other Invacare LiNX (Dynamic) codes
Source: invacaredocs.com/assets/documents/PIM/User_Manual_Linx_(en).pdf ↗
Summarised from public manuals. Always check the product's own manual before any repair.