Not stated CareCo Stratus beep codes 1-10 fault codes
MakerNot stated (maker / model not given by CareCo) UNVERIFIED
How codes showJoystick LEDs flash and the horn sounds; the beep code (1 to 10) is read from the Troubleshooting table in the manual
Codes (10)
| Code | Meaning |
|---|---|
| 1 beep | Battery voltage too low CONFIRMED |
| 2 beeps | Left (LHS) motor or wiring fault CONFIRMED |
| 3 beeps | Left (LHS) brake in freewheel mode, or brake / wiring fault CONFIRMED |
| 4 beeps | Right (RHS) motor or wiring fault CONFIRMED |
| 5 beeps | Right (RHS) brake in freewheel mode, or brake / wiring fault CONFIRMED |
| 6 beeps | Not used (N/A in the manual) CONFIRMED |
| 7 beeps | Joystick error CONFIRMED |
| 8 beeps | Controller or wiring fault CONFIRMED |
| 9 beeps | Left (LHS) motor or wiring fault CONFIRMED |
| 10 beeps | Right (RHS) motor or wiring fault CONFIRMED |
Codes without a link are status lights or not used, so they don't have their own page.
Models using this controller
Notes: CareCo's manual and product page do not name the controller or joystick maker or model. Only the codes below are published; code 6 is listed as N/A. Codes 2 and 9 both say LHS motor, and 4 and 10 both say RHS motor - the manual does not say how they differ.
Summarised from public manuals. Always check the product's own manual before any repair.