CareCo proLite Evisu Carbon Fibre – fault codes, parts & serial label

Typefolding carbon-fibre powerchair

Years / revisionIFU 2601-13 (product code PC02010008)

ControllerDC 24V (manual spec table - maker not stated) CONFIRMED

Fault codes (19)

Code	Meaning	Checks
1	OONAPU (out of neutral at power-up)	Switch OFF. Return the joystick to the centre position. Switch ON.
2	Brake in freewheel	Switch OFF. Ensure both brake levers are in the DRIVE position (downwards). Switch ON.
12-14	Joystick / wiring fault	Switch OFF. Disconnect, then reconnect the joystick power cables. Switch ON.
22	Battery signal communication error	Switch OFF. Remove the battery, then reinsert it into the battery tray. Switch ON.
23-24	Low temperature charging fault	Charge the powerchair for 6-8 hours.
25	Charging temperature too high	Switch OFF. Wait 10 minutes. Switch ON.
26	Charging current fault	Contact CareCo.
27	Discharge temperature too high	Switch OFF. Wait 10 minutes. Switch ON.
28	Discharge current fault	Contact CareCo.
29	Over voltage fault	Switch OFF. Wait 10 minutes. Switch ON.
30	Under voltage fault	Charge the powerchair for 6-8 hours.
31	Charging error	Contact CareCo.
41	Outside operating temperature range	Switch OFF. Move the product/battery within the recommended temperature range. Wait 1 hour. Switch ON.
42	Controller fault	Contact CareCo.
43-53	LHS motor fault	Contact CareCo.
54-64	RHS motor fault	Contact CareCo.
65	Power stall	Switch OFF. Wait 10 minutes. Switch ON.
66	Joystick / wiring fault	Switch OFF. Disconnect, then reconnect the joystick power cables. Switch ON.
72-99	Miscellaneous error	Contact CareCo.

WhereProduct identification label is located on the frame underneath the seat (CareCo user manual, product identification section). CONFIRMED

Label readsLayout and number formats not recorded - no label photo seen yet.

Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.