DC 24V proLite Evisu Carbon Fibre fault codes
MakerDC 24V CONFIRMED
How codes showFlash code on the joystick
Codes (19)
| Code | Meaning |
|---|---|
| 1 | OONAPU (out of neutral at power-up) CONFIRMED |
| 2 | Brake in freewheel CONFIRMED |
| 12-14 | Joystick / wiring fault CONFIRMED |
| 22 | Battery signal communication error CONFIRMED |
| 23-24 | Low temperature charging fault CONFIRMED |
| 25 | Charging temperature too high CONFIRMED |
| 26 | Charging current fault CONFIRMED |
| 27 | Discharge temperature too high CONFIRMED |
| 28 | Discharge current fault CONFIRMED |
| 29 | Over voltage fault CONFIRMED |
| 30 | Under voltage fault CONFIRMED |
| 31 | Charging error CONFIRMED |
| 41 | Outside operating temperature range CONFIRMED |
| 42 | Controller fault CONFIRMED |
| 43-53 | LHS motor fault CONFIRMED |
| 54-64 | RHS motor fault CONFIRMED |
| 65 | Power stall CONFIRMED |
| 66 | Joystick / wiring fault CONFIRMED |
| 72-99 | Miscellaneous error CONFIRMED |
Codes without a link are status lights or not used, so they don't have their own page.
Models using this controller
Notes: Fault table transcribed from the CareCo user manual: https://www.careco.co.uk/media/manual_documents/1771451013_IFU_Evisu_Powerchair_2601-13.pdf. Controller stated in the manual spec table.
Summarised from public manuals. Always check the product's own manual before any repair.