CareCo Frontier – fault codes, parts & serial label
Typemobility scooter
Years / revisionIFU 230721.3 (product code MS01010033.PC)
ControllerNot stated in the sources checked UNVERIFIED
Fault codes (8)
From the Frontier code set. All Frontier codes explained
| Code | Meaning | Checks |
|---|---|---|
| 1 | Battery voltage too low / battery fault | Charge the battery for 8-12 hours. Ensure the battery connections are secure. |
| 2 | Motor wiring fault | Check for loose connections and tighten if required. |
| 3 | Motor short circuit | Contact CareCo. |
| 6 | Charger connected | Disconnect the charger and cycle the power. |
| 7 | Throttle obstructed / throttle or speed-pot fault | Switch OFF. Release the throttle lever / clear the obstruction. Switch ON. If it persists: Contact CareCo. |
| 8 | Controller fault | Ensure all connections are secure. If it persists: Contact CareCo. |
| 9 | Brake fault | Check the park brake and motor connections; ensure the controller connections are secure. |
| 10 | Battery voltage too high | Switch OFF. Wait 60 seconds. Press and hold the battery-pack circuit breaker (under the front rubber cover) for up to 5 seconds. Switch ON. |
Serial code label
WhereProduct identification label is located on the cross-frame underneath the seat (CareCo user manual, product identification section). CONFIRMED
Label readsLayout and number formats not recorded - no label photo seen yet.
Parts (3)
| Part | Part no. |
|---|---|
| Battery | |
| Motor | |
| Wheels and tyres |
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.