Invacare scooter (Dynamic) fault code 10 flashes: Push / freewheel overspeed

Code10 flashes

MeaningPush / freewheel overspeed

ControllerInvacare scooter flash codes (Comet, Leo, Orion) CONFIRMED

How it showsFlashes on tiller LED 1–10

Likely part needed: Freewheel lever INFERRED – only if the checks below point to it. Find it ›

Likely causes

Pushed too fast

Step-by-step checks

Slow down

Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.

Parts that usually fix this INFERRED

Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.

Freewheel lever · part no. SP1505672
Freewheel lever listed for the Invacare Comet / Comet Pro / Comet Alpine

Find this part on Amazon UK ↗Find this part on eBay UK ↗

Lever, brake (freewheel) w/ hardware · part no. 1506318
Freewheel lever listed for the Invacare Leo

Find this part on Amazon UK ↗Find this part on eBay UK ↗

Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Models using this controller

Other Invacare scooter (Dynamic) codes

1 flash · 2 flashes · 3 flashes · 4 flashes · 5 flashes · 6 flashes · 7 flashes · 8 flashes · 9 flashes · 10 flashes

All Invacare scooter (Dynamic) codes ›

Source: invacaredocs.com/assets/documents/PIM/1603798~F-SM-EN-Comet-Series.pdf ↗

Summarised from public manuals. Always check the product's own manual before any repair.