Handicare 1000 / Minivator Simplicity fault codes
MakerHandicare (Minivator) CONFIRMED
How codes showSingle character on the diagnostic display
Codes (25)
| Code | Meaning |
|---|---|
| Blank | No display CONFIRMED |
| - | Charging, but won't drive CONFIRMED |
| 0 | Final limit circuit open CONFIRMED |
| 1 | Needs charge CONFIRMED |
| 2 | Off charge (beeps) CONFIRMED |
| 3 | Top track limit CONFIRMED |
| 4 | Top safety edge CONFIRMED |
| 5 | Bottom track limit CONFIRMED |
| 6 | Bottom safety edge CONFIRMED |
| 7 | Low battery voltage CONFIRMED |
| 8 / 9 | Joystick/toggle pressed (up/down) CONFIRMED |
| C | IR remote address fail CONFIRMED |
| d | Main relay not open CONFIRMED |
| E | Main relay not closed CONFIRMED |
| F | Brake semiconductor failed CONFIRMED |
| G | Brake not connected CONFIRMED |
| H | Main relay closed early CONFIRMED |
| L | Current limit exceeded CONFIRMED |
| n | Driving at half speed CONFIRMED |
| o | Control board memory problem CONFIRMED |
| r | Power supply fault while charging CONFIRMED |
| U | Power supply fault on float CONFIRMED |
| y | Main board hardware fault CONFIRMED |
| 1. | Over-current CONFIRMED |
| .8. | Sleeping CONFIRMED |
Codes without a link are status lights or not used, so they don't have their own page.
Models using this control board
Notes: From Handicare's 1000 user manual (appendix of display symbols).
Summarised from public manuals. Always check the product's own manual before any repair.