Handicare 1000 – fault codes, parts & serial label
Typestraight
Years / revisionMinivator 1000 successor
Control board1000 diagnostic display CONFIRMED
Fault codes (25)
From the 1000 / Minivator Simplicity display code set. All 1000 / Minivator Simplicity display codes
| Code | Meaning | Checks |
|---|---|---|
| Blank | No display | Switch on at the on/off switch |
| - | Charging, but won't drive | Fold both arms fully down |
| 0 | Final limit circuit open | Turn key on, twist to release the stop, lock the seat facing forward |
| 1 | Needs charge | Park on the charge point |
| 2 | Off charge (beeps) | Move to the charge point; check the plug |
| 3 | Top track limit | Normal at the end of travel |
| 4 | Top safety edge | Drive the other way, remove it |
| 5 | Bottom track limit | Normal at the end of travel |
| 6 | Bottom safety edge | Drive the other way, remove it |
| 7 | Low battery voltage | Return to charge point |
| 8 / 9 | Joystick/toggle pressed (up/down) | Nothing to do |
| C | IR remote address fail | Call Handicare |
| d | Main relay not open | Call Handicare |
| E | Main relay not closed | Call Handicare |
| F | Brake semiconductor failed | Call Handicare |
| G | Brake not connected | Call Handicare |
| H | Main relay closed early | Call Handicare |
| L | Current limit exceeded | Reduce load; call Handicare |
| n | Driving at half speed | Charge; call Handicare |
| o | Control board memory problem | Call Handicare |
| r | Power supply fault while charging | Check the mains switch/plug; call Handicare |
| U | Power supply fault on float | Call Handicare |
| y | Main board hardware fault | Call Handicare |
| 1. | Over-current | Call Handicare |
| .8. | Sleeping | Press the joystick or the on/off button to wake |
Serial code label
No serial location data yet for this stairlift. Serial codes
Parts (3)
| Part | Part no. |
|---|---|
| Minivator 1000 Stairlift Batteries | |
| Minivator 1000 type Charger | |
| Minivator 1000 PCB type 1 |
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.