Handicare 1000 / Minivator Simplicity fault code E: Main relay not closed
CodeE CONFIRMED
MeaningMain relay not closed
Control board1000 / Minivator Simplicity display CONFIRMED
How it showsSingle character on the diagnostic display
Likely part needed: Battery, Controller INFERRED – only if the checks below point to it. Find it ›
Likely causes
Board/batteries
Step-by-step checks
- Call Handicare
Stairlift faults that stay after these checks are a job for a trained engineer.
Parts that usually fix this INFERRED
Matched by ScootScan from the fault description to parts listed for models that use this control board. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.
Minivator 1000 Stairlift Batteries
Battery listed for the Handicare 1000
Battery listed for the Handicare 1000
Minivator 2000 stairlift battery set
Battery listed for the Minivator Simplicity 950 / 1000 / 2000
Battery listed for the Minivator Simplicity 950 / 1000 / 2000
Minivator 1000 PCB type 1
Controller listed for the Handicare 1000
Controller listed for the Handicare 1000
Minivator 950 Circuit board
Controller listed for the Minivator Simplicity 950 / 1000 / 2000
Controller listed for the Minivator Simplicity 950 / 1000 / 2000
Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Models using this control board
Other Handicare 1000 / Minivator Simplicity codes
Source: mobilitymasters.com/content/1000-stairlift-user-manual-handicare.pdf ↗
Summarised from public manuals. Always check the product's own manual before any repair.