CareCo I-Go Zenith Pro – fault codes, parts & serial label
Typepowerchair
Years / revisionZenith Pro manual v3 (product code PC01010002)
ControllerDynamic SHARK 40A (manual spec table) CONFIRMED
Fault codes (10)
From the I-Go Zenith Pro code set. All I-Go Zenith Pro codes explained
| Code | Meaning | Checks |
|---|---|---|
| 1 | User fault | Power off the power wheelchair, let rest for 15 minutes, and power on. |
| 2 | Battery fault | Charge batteries. Check battery cables and connections. |
| 3 | Left motor fault | Check left motor cables and connections are not loose or damaged. |
| 4 | Right motor fault | Check right motor cables and connections are not loose or damaged. |
| 5 | Left park brake fault | Put the freewheel lever in the drive mode position. Check left parking brake cables and connections. |
| 6 | Right park brake fault | Put the freewheel lever in the drive mode position. Check right parking brake cables and connections. |
| 7 | Joystick fault | Turn power off and back on. Check battery voltage. Check joystick connections are not loose. |
| 8 | Power module fault | Check battery voltage. Check connections are not loose or damaged going to the joystick and power module. |
| 9 | Communications fault | Check battery voltage. Check connections are not loose or damaged going to the joystick and power module. |
| 10 | Unknown fault | Contact your authorized I-Go provider. |
Serial code label
No serial location data yet for this powerchair. Serial codes
Parts (1)
| Part | Part no. |
|---|---|
| Battery |
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.