CareCo Abilize Stride Comforter – fault codes, parts & serial label
Typemobility scooter
Years / revisionStride Sport / Comforter manual 23.01.10 (product code MS01010011)
ControllerNot stated in the sources checked UNVERIFIED
Fault codes (9)
From the Abilize Stride Sport code set. All Abilize Stride Sport codes explained
| Code | Meaning | Checks |
|---|---|---|
| 1 | Battery low | Recharge the batteries. |
| 2 | Low battery fault | Recharge the batteries. Check the battery and associated connections and wiring. |
| 3 | High battery fault | When travelling down a slope reduce speed to minimise regenerative charging. |
| 4 | Current limit time-out / controller overheat | The scooter may have stalled. Turn the controller off and leave for a few minutes, then on again. The motor may be faulty: check the motor and associated connections and wiring. |
| 5 | Park brake | Check the park brake and associated connections and wiring. Ensure any associated switches are in the correct position. |
| 6 | Drive inhibit | Release the stop condition (e.g. seat raised). Disconnect the battery charger. Ensure the throttle is in neutral when turning on. The throttle may need re-calibration. |
| 7 | Speed pot | Check the throttle and speed pot and associated connections and wiring. |
| 8 | Motor voltage | Check the motor and associated connections and wiring. |
| 9 | Other error | Check all connections and wiring. |
Serial code label
No serial location data yet for this mobility scooter. Serial codes
Parts (3)
| Part | Part no. |
|---|---|
| Battery | |
| Motor | |
| Wheels and tyres |
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.