PG Drives S-Drive (programmer) fault codes
MakerPG Drives Technology (Curtiss-Wright) CONFIRMED
How codes show4-digit hex code on PGDT programmer / PC diagnostics
Codes (18)
| Code | Meaning |
|---|---|
| 0300 | Speed-limit pot wiper open |
| 0815 | Throttle pot reference disconnected |
| 0E07 | Throttle wiper shorted to a reference |
| 0E08 | Throttle wiper open circuit |
| 1320 | Current limit active |
| 1330 | Motor stall timeout |
| 1500 | Brake short circuit |
| 1502 | Brake open circuit |
| 1505 / 1506 | Left / right brake trip |
| 1600 / 1601 | High battery voltage |
| 1E03 / 1E08 | Inhibit 2 active (off-board charger connected) |
| 1E05 / 1E0A | Inhibit 3 active (on-board charger) |
| 2C00 | Low battery |
| 2F01 | Throttle displaced at power-up |
| 3B01 | Motor disconnected |
| 3D02 / 3D03 | Motor wiring trip |
| 7000 / 7001 | Freewheel mode engaged |
| 7821 / 7902 | Thermal foldback |
Codes without a link are status lights or not used, so they don't have their own page.
Models using this controller
No models are mapped to this controller in ScootScan yet.
Notes: Technician-level detail behind the flash code.
Summarised from public manuals. Always check the product's own manual before any repair.