PG Drives S-Drive (programmer) fault code 0300: Speed-limit pot wiper open
Likely causes
Speed pot or wiring open circuit (non-trip, speed limited)
Step-by-step checks
- Check speed pot and wiring
Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.
Parts that usually fix this INFERRED
Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.
General search – no specific part number is listed for these models yet, so check fit carefully.
Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Models using this controller
No models are mapped to this controller in ScootScan yet.
Other PG Drives S-Drive (programmer) codes
0300 · 0815 · 0E07 · 0E08 · 1320 · 1330 · 1500 · 1502 · 1505 / 1506 · 1600 / 1601 · 1E03 / 1E08 · 1E05 / 1E0A · 2C00 · 2F01 · 3B01 · 3D02 / 3D03 · 7000 / 7001 · 7821 / 7902
Source: industrial.curtisswright.com/sites/default/files/support-pgdt/printabl ↗
Summarised from public manuals. Always check the product's own manual before any repair.