PG Drives R-net fault code 4 LEDs: Right motor connection

Code4 LEDs CONFIRMED
MeaningRight motor connection
ControllerR-net powerchair control system (LED joystick module) CONFIRMED
How it showsBattery gauge on the joystick flashes rapidly; count the LEDs that flash (1 to 10). Speed LEDs flashing too = communication fault; actuator LED flashing = actuator trip
Likely part needed: Motor INFERRED – only if the checks below point to it. Find it ›

Likely causes

The right motor has a bad connection

Step-by-step checks

  1. Check the connections between the right motor and the power module

Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.

Parts that usually fix this INFERRED

Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.

Motor
General search – no specific part number is listed for these models yet, so check fit carefully.
Find a motor on Amazon UK ↗Find a motor on eBay UK ↗

Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Models using this controller

Other PG Drives R-net codes

1 LED · 2 LEDs · 3 LEDs · 4 LEDs · 5 LEDs · 6 LEDs · 7 LEDs · 8 LEDs · 9 LEDs · 10 LEDs · 7 LEDs + speed LEDs · Actuator LED flashes · Speed LEDs 2 and 4 flash · Speed indicator ripples outwards

All PG Drives R-net codes ›

Source: industrial.curtisswright.com/sites/default/files/sunrise/pgdt_rnet_man ↗

Summarised from public manuals. Always check the product's own manual before any repair.