Dynamic DX2 fault code 11 flashes: Stall timeout

Code11 flashes CONFIRMED
MeaningStall timeout
ControllerDX2 powerchair control system (REM42x remote) CONFIRMED
How it showsStatus / fault indicator on the DX2 remote flashes a number of times (1 to 12), pause, repeat

Likely causes

The motors were stalled for too long (pushing against an obstacle)

Step-by-step checks

  1. Switch off and on
  2. Reverse away from the obstacle

Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.

Models using this controller

No models are mapped to this controller in ScootScan yet.

Other Dynamic DX2 codes

1 flash · 2 flashes · 3 flashes · 4 flashes · 5 flashes · 6 flashes · 7 flashes · 8 flashes · 9 flashes · 10 flashes · 11 flashes · 12 flashes

All Dynamic DX2 codes ›

Source: dynamiccontrols.com/wp-content/uploads/2025/09/dx2-rem42x-installation ↗

Summarised from public manuals. Always check the product's own manual before any repair.