CareCo Zoom Pro fault codes
MakerDynamic (per CareCo spec sheet) CONFIRMED
How codes showTiller display flashes + horn sounds code count
Codes (9)
| Code | Meaning |
|---|---|
| 1 | Battery voltage low |
| 2 | Battery low / battery wiring fault |
| 3 | Battery voltage too high |
| 4 | Motor overheated, or motor/wiring fault |
| 5 | Freewheel mode / brake |
| 6 | Charger connected |
| 7 | Throttle obstructed or throttle/speed pot wiring fault |
| 8 | Motor / wiring fault |
| 9 | Controller / wiring fault |
Codes without a link are status lights or not used, so they don't have their own page.
Models using this controller
Notes: Spec table lists 'Controller specification: DYNAMIC 50A'. Exact Dynamic model not stated.
Summarised from public manuals. Always check the product's own manual before any repair.