CareCo Zoom Pro – fault codes, parts & serial label
Typeboot
Years / revisionIFU 2601-04 (MS01010039)
ControllerDynamic 50A (spec sheet) CONFIRMED
Fault codes (9)
From the CareCo Zoom Pro tiller codes (Dynamic 50A) code set. All CareCo Zoom Pro tiller codes (Dynamic 50A) codes
| Code | Meaning | Checks |
|---|---|---|
| 1 | Battery voltage low | Charge |
| 2 | Battery low / battery wiring fault | Charge; contact CareCo |
| 3 | Battery voltage too high | Switch off 60s; hold circuit breaker up to 5s |
| 4 | Motor overheated, or motor/wiring fault | Switch off, wait 10 min, restart; if it persists contact CareCo |
| 5 | Freewheel mode / brake | Return to drive; restart |
| 6 | Charger connected | Disconnect charger; restart |
| 7 | Throttle obstructed or throttle/speed pot wiring fault | Release lever; contact CareCo |
| 8 | Motor / wiring fault | Contact CareCo |
| 9 | Controller / wiring fault | Contact CareCo |
Serial code label
No serial location data yet for this mobility scooter. Serial codes
Parts (0)
No parts recorded for this model yet.
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.