CareCo Li-Tech Cybex – fault codes, parts & serial label
Typeboot (auto-folding, lithium)
Years / revisionIFU 2604-09 (MS04010018)
ControllerUnbranded 45A UNVERIFIED
Fault codes (10)
From the CareCo Li-Tech E-codes code set. All CareCo Li-Tech E-codes codes
| Code | Meaning | Checks |
|---|---|---|
| E00 | Controller / wiring fault | Contact CareCo |
| E01 | Battery voltage too low | Charge 6–8 hours |
| E02 | Battery / wiring fault | Contact CareCo |
| E03 | Motor overheated, or motor/wiring fault | Off 10 min, restart; else contact CareCo |
| E05 | Freewheel mode | Place in drive, restart |
| E06 | Charger connected | Disconnect charger, restart |
| E07 | Throttle obstructed or throttle/speed pot fault | Release; contact CareCo |
| E08 | Motor / wiring fault | Contact CareCo |
| E09 | Brake / wiring fault | Contact CareCo |
| E10 | Battery voltage too high | Switch off, wait 10 min, switch on; contact CareCo if it persists |
Serial code label
No serial location data yet for this mobility scooter. Serial codes
Parts (0)
No parts recorded for this model yet.
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.