Acorn Superglide 130 (older, T502) – fault codes, parts & serial label
Typestraight
Years / revisionISO/BSI era
Control boardT502 INFERRED
Fault codes (16)
From the Superglide 130 (ISO/BSI) – T502 board code set. All Superglide 130 (ISO/BSI) – T502 board codes
| Code | Meaning | Checks |
|---|---|---|
| A1 | Not charging (beeps) | Drive to the charge point; check mains |
| C1 | Charging | Leave on charge |
| C4 | Fully charged | Nothing to do |
| C5 | Battery fault | Dealer |
| E1 | Footrest uphill edge | Drive the other way, clear it |
| E2 | Footrest downhill edge | Drive the other way, clear it |
| E3 | Carriage uphill edge | Drive the other way, clear it |
| E4 | Carriage downhill edge | Drive the other way, clear it |
| E5 | Seat not in position | Turn seat back to lock |
| E8 | Battery low | Return to charge point |
| E9 | Key off | Turn key on |
| F2 | Brake fault | Charge; Dealer if it stays |
| F4 | Over-current | Dealer |
| F6 | Final limit | Dealer / hand wind away |
| F7 | OSG tripped | Hand wind up (clockwise) then dealer |
| F8 | System lockout | Dealer |
Serial code label
No serial location data yet for this stairlift. Serial codes
Parts (9)
| Part | Part no. |
|---|---|
| Acorn 130 Stairlift Batteries | |
| Acorn 120 & 130 Motor Brake & Gearbox Unit | |
| Acorn 120/130 Lemac Motor Brake | |
| Acorn 130 Stairlift Motor Brush Set | |
| Acorn 120 / 130 Main PCB | |
| Acorn / Brooks 110, 120, 130 Safety Edge Switch | |
| Acorn 110 / 120 /130 OSG Regulator Cog | |
| Acorn 130 Winding Handle | |
| Acorn 130 remote control |
Summarised from public manuals and supplier listings. Always check the product's own manual before any repair.