thyssenkrupp Flow2 fault codes
Makerthyssenkrupp / TK Access Solutions CONFIRMED
How codes show'F' + 2 digits on the display; 'C' warnings on service display only
Codes (20)
| Code | Meaning |
|---|---|
| F01 / F02 | Obstruction left / right CONFIRMED |
| F05 / F07 | Tilt beyond 5° / 7° CONFIRMED |
| F12 - F14 | Over-current CONFIRMED |
| F15 - F17 | Hall sensor fault CONFIRMED |
| F21 | Battery under 19 V going up CONFIRMED |
| F22 | Battery under 14 V or over 30 V CONFIRMED |
| F23 | Brake circuit CONFIRMED |
| F32 | User emergency stop CONFIRMED |
| F33 | Overspeed device tripped CONFIRMED |
| F37 | Swivel beyond 110° CONFIRMED |
| F52 / F53 | Drive / swivel position unknown CONFIRMED |
| F55 | Brown-out CONFIRMED |
| F72 | Emergency stop test due CONFIRMED |
| F74 | Manual swivel turned CONFIRMED |
| F75 | Battery under 21 V – no upward travel CONFIRMED |
| F76 | Needs charging CONFIRMED |
| F77 / F78 | Motor temperature CONFIRMED |
| Two-tone beep every 13 s | Not on a charge point CONFIRMED |
| Red LED flashing + fast ping | Obstacle – opposite direction only CONFIRMED |
| Red LED steady + fast ping | Malfunction CONFIRMED |
Codes without a link are status lights or not used, so they don't have their own page.
Models using this control board
Notes: Older Flow2 uses E codes (different numbers) – generation difference, see Gaps/QA.
Summarised from public manuals. Always check the product's own manual before any repair.