Luggie fault code 2 flashes: Low battery fault

Code2 flashes
MeaningLow battery fault
ControllerLuggie status fault codes INFERRED
How it showsPower-switch LED: slow = low battery, rapid = fault count
Likely part needed: Battery INFERRED – only if the checks below point to it. Find it ›

Likely causes

Flat / wiring

Step-by-step checks

  1. Recharge
  2. Check battery wiring

Switch off before unplugging anything. If the code stays after these checks, get a trained technician to look at it.

Parts that usually fix this INFERRED

Matched by ScootScan from the fault description to parts listed for models that use this controller. Do the checks first – many faults are fixed by charging, a loose plug or a reset – and check the part fits your model before ordering.

Battery connector assy. · part no. PAE1-1400
Battery listed for the Freerider Luggie (Standard/Elite/Elite Plus/Super)
Find this part on Amazon UK ↗Find this part on eBay UK ↗
10.5ah Lithium battery · part no. PA04-A702-B
Battery listed for the Freerider Luggie (Standard/Elite/Elite Plus/Super)
Find this part on Amazon UK ↗Find this part on eBay UK ↗

Some links may be affiliate links; we may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Models using this controller

Other Luggie codes

Slow flash (1/sec) · 1 flash · 2 flashes · 3 flashes · 4 flashes · 5 flashes · 6 flashes · 7 flashes · 8 flashes · 9 flashes

All Luggie codes ›

Source: images.accessiblemadrid.com/products/documents/589/luggie-elite-plus-u ↗

Summarised from public manuals. Always check the product's own manual before any repair.